F065
Диаметри номиналии қубури берунӣ:
- Аз ҷониби Стандарти Корхонаи Таҷҳизоти Криогении HL тавсия дода шудааст. Он инчунин метавонад мувофиқи талаботи муштарӣ истеҳсол карда шавад.
- Фишори тарроҳӣ:
- Тавсияшуда ≤ 16 бар. Ё Навъи пайвасти кафшершударо интихоб мекунад (≤40 бар).
- Маводи қубури беруна
Бе талаботи махсус, маводи қубури дохилӣ ва қубури беруна якхела интихоб карда мешаванд.
3.1.3 Навъи пайвасти кафшерӣ
модел
Пайвастшавӣ
Навъ
Диаметри номиналии қубури дарунӣ
Фишори тарроҳӣ
Мавод
қубури дарунӣ
Стандартӣ
Эзоҳ
W010
00X
Навъи пайвасти кафшершуда барои шланги чандири изолятсияи статикии вакуумӣ
DN10, 3/8"
8~40 бар
Силсилаи 300 аз пӯлоди зангногир
ASME B31.3
| V | DN20, 3/4" | DN25, 1" | Диаметри номиналии қубури берунӣ: | |
| Фишори тарроҳӣ | Маводи қубури дохилӣ. | А 304 аст, | DN40, 1-1/2" | C 316 аст, |
| D 316L аст, | HLHS | HLHS | W015 | 00X |
| DN15, 1/2" | No | No | HLHS | Фишори тарроҳӣ |
| Nominal Diameter of Inner Pipe | 00X | HLHS | W025 | 00X |
| Design Pressure | HLHS | DN32, 1-1/4" | 00X | DN32, 1-1/4" |
| HLHS | HLHS | HLHS | DN40, 1-1/2" | HLHS |
| Тавсияшуда ≤ DN25 ё 1" ё намуди пайвасткунии байонети вакуумӣ бо фланҷҳо ва болтҳо (аз DN10, 3/8" то DN80, 3"), намуди пайвасткунии кафшерӣ (аз DN10, 3/8" то DN150, 6") -ро интихоб мекунад. | 00X | |||
| DN50, 2" | HLHS | |||
| Material | 300 Series Stainless Steel | |||
| Стандартӣ | LN2HLHS2W080 | |||
00X
DN80, 3"
| LHSW100 | |
| 00X | |
| DN100, 4" |  |
LHSW125
| 00X | DN125, 5" | LHSW150 | 00X | DN150, 6" | Диаметри номиналии қубури берунӣ: |
| Аз ҷониби Стандарти Корхонаи Таҷҳизоти Криогении HL тавсия дода шудааст. Он инчунин метавонад мувофиқи талаботи муштарӣ истеҳсол карда шавад. | Маводи қубури беруна | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" |
| Навъ | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Стандартӣ | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| DN10, 3/8" | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Фишори тарроҳӣ. | / | DN25, 1" | DN25, 1" | / | |
| Маводи қубури дохилӣ. | / | DN25, 1" | DN25, 1" | / | |
| C 316 аст, | / | DN25, 1" | DN25, 1" | / | |
| HLHS | / | DN25, 1" | DN25, 1" | / | |
| DN15, 1/2" | / | DN25, 1" | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / | |
| HLHS | / | / | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / |
Диаметри номиналии қубури дохилӣ:
| Тавсияшуда ≤ DN25 ё 1" ё намуди пайвасткунии байонети вакуумӣ бо фланҷҳо ва болтҳо (аз DN10, 3/8" то DN80, 3"), намуди пайвасткунии кафшерӣ (аз DN10, 3/8" то DN150, 6") -ро интихоб мекунад. | Диаметри номиналии қубури берунӣ: |
| Аз ҷониби Стандарти Корхонаи Таҷҳизоти Криогении HL тавсия дода шудааст. Он инчунин метавонад мувофиқи талаботи муштарӣ истеҳсол карда шавад. | Фишори тарроҳӣ: |
| Тавсияшуда ≤ 16 бар. Ё намуди пайвасти кафшершударо интихоб мекунад (≤40 бар) | Маводи қубури берунаБе талаботи махсус, маводи қубури дохилӣ ва қубури беруна якхела интихоб карда мешаванд.3.2 Системаи қубурҳои изолятсияи вакуумии динамикӣ3/S |
| 3.2.1 Навъи пайвастшавии байонети вакуумӣ бо қулфҳо | модел |
| Пайвастшавӣ | Навъ |
| Диаметри номиналии қубури дарунӣ | Фишори тарроҳӣ |
| Мавод | қубури дарунӣ |
| Стандартӣ | Эзоҳ |
HDB01008
Навъи пайвастшавии байонети вакуумӣ бо қулфҳо барои шланги чандири изолятсияи вакуумии динамикӣ
lDN10, 3/8"
l8 бар
| Силсилаи 300 аз пӯлоди зангногир C 316 аст, | Маводи қубури дохилӣ. | |
| А 304 аст, | B 304L аст,C 316 аст,D 316L аст, | |
| Е дигар аст. | HLH | DB01508 |
| DN15, 1/2" | Фишори тарроҳӣ: | Фишори тарроҳӣ: |
| DN20, 3/4" | Фишори тарроҳӣ: | Фишори тарроҳӣ: |
| DN25, 1" | Фишори тарроҳӣ: | Фишори тарроҳӣ: |
| Диаметри номиналии қубури берунӣ: | Фишори тарроҳӣ: | Фишори тарроҳӣ: |
Тавсияшуда ≤ 8 бар. Ё намуди пайвастшавии байонети вакуумӣ бо фланҷҳо ва болтҳо (≤16 бар), намуди пайвастшавии кафшерӣ (≤40 бар)-ро интихоб мекунад.Маводи қубури берунаБе талаботи махсус, маводи қубури дохилӣ ва қубури беруна якхела интихоб карда мешаванд.
Ҳолати барқ:
HL-HX-X-Ин макон бояд ба насосҳои вакуумӣ барқ таъмин кунад ва ба таҷҳизоти криогении HL дар бораи маълумоти маҳаллии барқ (шиддат ва герц) маълумот диҳад.-00-X
3.2.2 Навъи пайвастшавии байонети вакуумӣ бо фланцҳо ва болтҳо
модел
Пайвастшавӣ
Навъ
Диаметри номиналии қубури дарунӣ
Фишори тарроҳӣ
Мавод
қубури дарунӣ
Стандартӣ
Эзоҳ
Nominal Diameter of Inner Pipe
00X
8~16 бар
DN10, 3/8"
8~16 бар
Силсилаи 300 аз пӯлоди зангногир
Design Pressure
Фишори тарроҳӣ.
08 8 бар аст,
16 ба 16 бар баробар аст.
Маводи қубури дохилӣ.
А 304 аст,
B 304L аст,
C 316 аст,
D 316L аст,
Е дигар аст.
F015
00X
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSF040X | Силсилаи ҷудокунандаи фазаи изолятсияшудаи вакуумӣ | DN10, 3/8" | арманӣ
| 300 Series Stainless Steel | ASME B31.3 | X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| ФаронсавӣДиаметри номиналии қубури берунӣ:X | DN15, 1/2" | |||||
| ФаронсавӣТавсияшуда ≤ 16 бар. Ё Навъи пайвасти кафшершударо интихоб мекунад (≤40 бар).X | DN20, 3/4" | |||||
| ФаронсавӣҲолати барқ:X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: исландӣ
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| Фаронсавӣ08 8 бар аст,00X | ва 25, 32, 40. | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| ФаронсавӣСамоаӣ00X | DN15, 1/2" | |||||
| ФаронсавӣСиндӣ00X | DN20, 3/4" | |||||
| ФаронсавӣТоҷикӣ00X | DN25, 1" | |||||
| ФаронсавӣТайӣ00X | DN32, 1-1/4" | |||||
| Фаронсавӣузбекӣ00X | DN40, 1-1/2" | |||||
| ФаронсавӣХоса00X | DN50, 2" | |||||
| ФаронсавӣЗулу00X | DN65, 2-1/2" | |||||
| ФаронсавӣОрия00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Ҳолати барқ:
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHS00X00X | DN10, 3/8" | DN10, 3/8" | Силсилаи 300 аз пӯлоди зангногир | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| ФаронсавӣDN15, 1/2"00X | DN15, 1/2" | |||||
| ФаронсавӣDN20, 3/4"00X | DN20, 3/4" | |||||
| ФаронсавӣDN25, 1"00X | DN25, 1" | |||||
| ФаронсавӣW03200X | DN32, 1-1/4" | |||||
| ФаронсавӣW04000X | DN40, 1-1/2" | |||||
| ФаронсавӣW05000X | DN50, 2" | |||||
| ФаронсавӣW06500X | DN65, 2-1/2" | |||||
| ФаронсавӣW08000X | DN80, 3" | |||||
| HШланги куртаи чангкашак00X | DN100, 4" | |||||
| HКлапани танзимкунандаи ҷараёни оксигени моеъ дар Чин00X | DN125, 5" | |||||
| HНархи яклухт Чин Чин ISO Standard Tank 2...00X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSСистемаи насоси вакуумии динамикӣ00X | Силсилаи ҷудокунандаи фазаи изолятсияшудаи вакуумӣ | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| ФаронсавӣВатсап00X | DN15, 1/2" | |||||
| ФаронсавӣWeChat00X | DN20, 3/4" | |||||
| ФаронсавӣОлмонӣ00X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Юнонӣ
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Даниягӣ
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLЛаосӣX | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | арманӣ
| 300 Series Stainless Steel | ASME B31.3 | X:Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHЭстонӣX | DN15, 1/2" | |||||
| HLHФрисӣX | DN20, 3/4" | |||||
| HLHГуҷаратӣX | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: исландӣ
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLмалаяламӣ00X | Маори | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDСамоаӣ00X | DN15, 1/2" | |||||
| HLHDСиндӣ00X | DN20, 3/4" | |||||
| HLHDТоҷикӣ00X | DN25, 1" | |||||
| HLHDТайӣ00X | DN32, 1-1/4" | |||||
| HLHDузбекӣ00X | DN40, 1-1/2" | |||||
| HLHDХоса00X | DN50, 2" | |||||
| HLHDЗулу00X | DN65, 2-1/2" | |||||
| HLHDОрия00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤40 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDW01000X | Welded Connection Type for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~40 bar | Stainless Steel 304, 304L, 316, 316L | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDW01500X | DN15, 1/2" | |||||
| HLHDW02000X | DN20, 3/4" | |||||
| HLHDW02500X | DN25, 1" | |||||
| HLHDW03200X | DN32, 1-1/4" | |||||
| HLHDW04000X | DN40, 1-1/2" | |||||
| HLHDW05000X | DN50, 2" | |||||
| HLHDW06500X | DN65, 2-1/2" | |||||
| HLHDW08000X | DN80, 3" | |||||
| HLHDW10000X | DN100, 4" | |||||
| HLHDW12500X | DN125, 5" | |||||
| HLHDW15000X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDT01000X | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDB01500X | DN15, 1/2" | |||||
| HLHDB02000X | DN20, 3/4" | |||||
| HLHDB02500X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects the, Welded Connection Type (≤40 bar)
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
